Siser EasyWeed EXTRA 15"X 12" SHEET (14.75" ACTUAL SIZE)

  • $3.79
  • Save $0.46
Shipping calculated at checkout.

Please note, this item may take 3 business days to ship.  Your whole order will ship in 3 business days when you order from our Metal Line.

Our Best-Selling Heat Transfer Vinyl – Now for Nylon!

EasyWeed Extra shares almost all the great benefits of EasyWeed with the bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier so you can cut detailed logos and weed them effortlessly. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra – with its semi-gloss finish, can be layered, extending your creativity and allowing you to say “yes” to more complicated designs. EasyWeed Extra can be cut with laser systems.

EasyWeed Extra is CPSIA Certified, so it’s perfect for decorating items intended for children.

Recommened Accessories & Care
EasyWeed Extra Applies to Recommended Accessories Laundering
100% cotton
Poly/cotton blends
100% polyester
Siser Weeder
Multipurpose Paper
Kraft Paper
Heat Transfer Cover Sheet

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Application instructions (home iron) Application Instructions (heat press)
1.Set iron dial between Cotton and Linen.
2.Cover design with Kraft paper or non-stick cover sheet.
3.Place on flat, hard surface (ironing board not recommended).
4.Press iron with medium/firm pressure (do not slide iron).
5.Press each section of design for 10-15 seconds.
6.If areas of design lift after application, replace cover
   sheet and re-press for 5-10 seconds.
7.Peel carrier hot or cold
1.Cut all designs in reverse (mirror).
2.Weed away excess material.
3.Prepress garment for about 2-3 seconds to remove wrinkles
   and moisture.
4.Position Glitter design on garment.
5.Cover with a Teflon sheet to prevent scorching.
6.Heat press at 320 degrees F/160 C for 10-15 seconds with
   Firm pressure.
7.Pressure: Medium.
8.Peel HOT.