EasyPSV Removable

  • $0.65
Shipping calculated at checkout.


 Siser® EasyPSV™ Removable is a matte pressure sensitive calendered vinyl used for a wide variety of indoor and outdoor applications such as decals, signs, and decorations.
 Use removable EasyPSV™ to add a little whimsy to your washing machine, so you can change up its design as oftenas you switch your style. EasyPSV removable includes all kinds of popular home décor colors so you can go vinyl crazy and decorate without a care… and then redecorate a few months later! If home décor isn’t your thing, you can always temporarily decorate electronics,instruments, or even your vinyl cutter.

Outdoor Durability Up to 3 years depending on usage and exposure to elements
Thickness 3.0 mil (76.2 micron)
Adhesive Removable, Water Based
Liner 78# Kraft
Minimum, Application Temperature +40° F
Shelf Life 1 year when stored at 70° F and 50% relative humidity.
Materials that can be decorated with
EasyPSV Glitter include
Painted drywall, glass/mirrors, wood, plastic, metal,
Some common projects include Wall decals, laptop/craft cutter stickers, seasonal decor.
*Not recommended for use near flame/ heat source, or with microwave, and dishwasher.
Surface Prep Instructions For best adhesion, remove any dirt, dust, grease, etc to prepare the surface you want to decorate with EasyPSV. The following cleaning method is not recommended for porous surfaces
such as unfinished/untreated wood. It is recommended that all other surfaces be spot tested with care before cleaning the entire application area.

Non-porous surfaces can be cleaned with a mix of approximately 2 parts water and 1 part isopropyl alcohol (70% or higher for best results) or non-ammonia based window cleaner. Use a microfiber or lint free towel to clean the application area with the mixture. Paper towel is not recommended since it will leave behind small bits of paper that can become trapped under the EasyPSV during
application. Ensure the area is completely dry before applying.
*The cleaning method outlined above is subject to modification and not always suitable for every substrate.
 The purchaser should independently determine with their own testing to use this method or not on a case by case basis.
Application Instructions 1. Place EasyPSV with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
2. Weed excess vinyl.
3. Remove the application tape's paper liner. Place tape on top of EasyPSV and burnish with a squeegee.
4. Lift the application tape and EasyPSV away from the paper liner to expose the permanent adhesive.
5. Place the application tape on your desired object and burnish with a squeegee to fully adhere the design.
6. Gently peel away the application tape, leaving just your EasyPSV design on the object.
Removal Instructions

Clean removability guaranteed for 2 years. Later removal may require and adhesive remover to clean
all the adhesive from the surface. If the EasyPSV is stubbornly sticking, the heat from a hair dryer or garment steamer can help loosen the adhesive. However, heating is not recommended for glass due to possible shattering.

To remove Permanent EasyPSV from glass, saturate the decal with soap and water.
Cover with plastic wrap and let sit for a few hours before attempting to remove. An adhesive remover may still be required to clean all adhesive from the surface after removing the EasyPSV.

*The removal instructions outlined above are subject to modification and not always suitable for every substrate.
 The purchaser should independently determine with their own testing to use this method or not on a case by case basis.
Storage Instructions For best results, avoid direct sunlight and extreme temperatures. Ideally, temperatures should not surpass
70° F and 50% relative humidity. When stored properly, EasyPSV Removable has a shelf life of up to 1 year.