Siser Holographic Heat Transfer Vinyl

Please read below the warning about the color Spectrum.

Spectrum has a pattern repeat line through the vinyl every 18" or so. We cannot do anything to fix this color, it comes like this from the factory.

ONCE YOU USE THIS, YOU'LL WANT MORE!

Siser Holographic HTV is an awesome addition to our store.  ALWAYS DO A TEST CUT, to get those settings right.  The holographic material is designed to be used on fabrics and is applied using either an iron or heat press.  Siser htv's may also be applied to products such as mugs and glassware, but a proper heat source, such as a mug press, is required.   

Please use the drop down list of colors to choose your color. If you want to make sure it's the correct color, scroll back up and the cast for the color you choose will appear at the top of the page.

Cut settings:  

Cricut:

Blade: Standard
Setting: Light Cardstock

Silhouette Cameo:

Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 14

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold