Stahls' Premium Plus (High Tack)

Stahls' Premium Plus (High Tack)

$5.40

Shipping calculated at checkout.

Stahl's Fashion Film, Stahl's htv, Stahl's Performance Plus high Tack, Stahl's Performance Plus low Tack, Stahl's Glitter Flake, Stahl's Glitter HTV, PROFESSIONAL HTV, COMMERCIAL HTV,
NEW CAD-CUT® Premium Plus Heat Transfer Vinyl (High Tack)
Sheet size is 20" by 12" with a +/- tolerance of 1/4"
Some colors may take 3-4 days to ship, please be patient, we will keep in touch and inform you.
Stahls' HIGHLY RECOMMENDS you use a heat press to apply Premium Plus.
Applies at a low temp to prevent scorching on heat-sensitive items with Stretch & Rebound of 5.
Soft & Stretchable
Silky matte finish
Choose low tack for larger designs, high tack for more detailed designs
High tack peels hot for quick production and no distortion of design on stretchy fabrics
New range of bright colors
Laser cutter compatible

Material Specifications

Composition: Polyurethane (PU)

Carrier: Frosted, Pressure-Sensitive
Thickness:
Low Tack: 80-108 microns/.080-108mm
High Tack: 92 microns/.092mm
Stretch & Rebound: 5
Washability: 50
Safety: CPSIA Certified
High Tack Application Instructions
Time: 8-12 Seconds

Temp: 280-300°F/138-149°C

Pressure: FIRM

Peel: Hot

Two-Color 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds

Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
- Lycra®/Spandex Blends
- Care Instructions
  Machine wash inside-out using mild detergent.
  Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
- Care Instructions
  Machine wash inside-out using mild detergent.
  Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
- Cutter Guidelines
  
  Cutter Blade Force Offset Speed
  
  Graphtec (Low Tack) 45° 11 1 35
  
  Graphtec (High Tack) 45° 10 .3 mm 64 cm/s
  
  Roland GS-24 45° 60-70g .25 25 cm/s
  
  Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Customer Reviews

Based on 1 review Write a review

Customer Reviews

Based on 1 review Write a review